Before proceeding to this stage, you should make sure that you activate the O2 environment with alienv, then install the argcomplete package with pip install argcomplete and pip3 install argcomplete in O2, and then source the autocomplete bash script with source argcomplete.sh
You can Complete this with a TAB key after each word and character you type in command line. Keep this thing in your mind.
If you have successfully installed this package and successfully sourced the script, follow these steps.
step 1: type python3 (If your symbolic link is python for python3, type python)
step 2: type the name of your script (eg runTableMaker.py)
step 3: At this stage, since the JSON configuration files are in the Configs folder, enter the name of your JSON config file by completing it with TAB or listing the available options
for ex. if you type:
python3 runTableMaker.py Configs
you will get this displayed options in your terminal:
configs/configAnalysisData.json configs/configFlowDataRun3.json configs/configtestFilterPPDataRun3.json configs/readerConfiguration_reducedEventMC.json
configs/configAnalysisMC.json configs/configTableMakerDataRun2.json configs/configtestFlowDataRun3.json configs/writerConfiguration_dileptonMC.json
configs/configFilterPPDataRun2.json configs/configTableMakerDataRun3.json configs/configtestTableMakerDataRun3.json configs/writerConfiguration_dileptons.json
configs/configFilterPPDataRun3.json configs/configTableMakerMCRun2.json configs/readerConfiguration_dilepton.json
configs/configFlowDataRun2.json configs/configTableMakerMCRun3.json configs/readerConfiguration_reducedEvent.json
then you can complete your JSON config file (for example assuming you export configTableMakerMCRun3.json to configure tablemaker for mc run 3
python3 runTableMaker.py configs/configTableMakerMCRun3.json
P.S You can Complete this with a TAB key after each word and character you type in command line.
step 4: now when you type – and press TAB key all parameter options in interface will be listed
python3 runTableMaker.py configs/configTableMakerMCRun3.json --
if you type like this and press TAB you will see all the parameters in the interface in your terminal like this:
--add_fdd_conv --cfgBarrelSels --cfgMinTpcSignal --cfgPairCuts --dcamin --isCovariance --mincrossedrows --syst
--add_mc_conv --cfgBarrelTrackCuts --cfgMuonCuts --cfgWithQA --dcav0dau --isFilterPPTiny --muonSelection --tof-expreso
--add_track_prop --cfgDetailedQA --cfgMuonLowPt --customDeltaBC --debug --isProcessEvTime --onlySelect --v0cospa
--aod --cfgEventCuts --cfgMuonsCuts --cutLister --est --logFile --pid --v0Rmax
--autoDummy --cfgMaxTpcSignal --cfgMuonSels --d_bz --help --maxchi2tpc --process --v0Rmin
--cfgBarrelLowPt --cfgMCsignals --cfgNoQA --dcamax --isBarrelSelectionTiny --MCSignalsLister --run
VERY IMPORTANT STEP AND P.S: When configuring the runTableMaker.py script, the -runData and -runMC parameters are used when configuring the tablemaker for MC or Data. Since these parameters start with a single minus, do not forget to configure the TableMaker script only at the first time, by pressing the tab and configuring it (other interfaces do not have a parameter that starts with a single minus)
python3 runTableMaker.py configs/configTableMakerMCRun3.json -
Then you will see -runData and -runMC in your parameters:
--add_fdd_conv --cfgBarrelTrackCuts --cfgMuonLowPt --cutLister -h --maxchi2tpc --run --v0Rmin
--add_mc_conv --cfgDetailedQA --cfgMuonsCuts --d_bz --help --MCSignalsLister -runData
--add_track_prop --cfgEventCuts --cfgMuonSels --dcamax --isBarrelSelectionTiny --mincrossedrows -runMC
--aod --cfgMaxTpcSignal --cfgNoQA --dcamin --isCovariance --muonSelection --syst
--autoDummy --cfgMCsignals --cfgPairCuts --dcav0dau --isFilterPPTiny --onlySelect --tof-expreso
--cfgBarrelLowPt --cfgMinTpcSignal --cfgWithQA --debug --isProcessEvTime --pid --v0cospa
--cfgBarrelSels --cfgMuonCuts --customDeltaBC --est --logFile --process --v0Rmax
step 5: After entering one of these parameters (eg –cfgBarrelTrackCuts for runTableMaker.py) leave a space and press tab again. As a result you will see each value this parameter can take.
python3 runTableMaker.py configs/configTableMakerMCRun3.json -runMC --cfgBarrelTrackCuts
If you leave a space after cfgBarrelTrackCuts and press TAB:
electronPID1 eventStandard jpsiPIDshift matchedGlobal PIDCalib
electronPID1randomized eventStandardNoINT7 jpsiPIDworseRes mchTrack pidcalib_ele
electronPID1shiftDown highPtHadron jpsiStandardKine muonHighPt PIDStandardKine
electronPID1shiftUp int7vtxZ5 kaonPID muonLowPt singleDCA
electronPID2 jpsiBenchmarkCuts kaonPIDnsigma muonQualityCuts standardPrimaryTrack
electronPID2randomized jpsiKineAndQuality lmee_GlobalTrack muonTightQualityCutsForTests TightGlobalTrack
electronPIDnsigma jpsiO2MCdebugCuts lmee_GlobalTrackRun3 NoPID TightGlobalTrackRun3
electronPIDnsigmaLoose jpsiO2MCdebugCuts2 lmee_GlobalTrackRun3_lowPt pairDCA TightTPCTrackRun3
electronPIDnsigmaOpen jpsiO2MCdebugCuts3 lmee_GlobalTrackRun3_TPC_ePID_lowPt pairJpsi tof_electron
electronPIDnsigmaRandomized jpsiPID1 lmeeLowBKine pairJpsiLowPt1 tof_electron_loose
electronPIDshift jpsiPID1Randomized lmeePID_TOFrec pairJpsiLowPt2 tpc_electron
electronPIDworseRes jpsiPID1shiftDown lmeePID_TPChadrej pairMassLow tpc_kaon_rejection
electronStandardQuality jpsiPID1shiftUp lmeePID_TPChadrejTOFrec pairNoCut tpc_pion_band_rejection
electronStandardQualityBenchmark jpsiPID2 lmeePID_TPChadrejTOFrecRun3 pairPsi2S tpc_pion_rejection
electronStandardQualityForO2MCdebug jpsiPID2Randomized lmeeStandardKine pairPtLow1 tpc_pion_rejection_highp
eventDimuonStandard jpsiPIDnsigma lmee_TPCTrackRun3_lowPt pairPtLow2 tpc_proton_rejection
eventMuonStandard jpsiPIDnsigmaRandomized matchedFwd pairUpsilon
step 6: after configuring the config, type space and – again to see other parameters again and see other parameters and use autocomplete with TAB as you type
python3 runTableMaker.py configs/configTableMakerMCRun3.json -runMC --cfgBarrelTrackCuts --
--add_fdd_conv --cfgBarrelSels --cfgMinTpcSignal --cfgPairCuts --dcamin --isCovariance --mincrossedrows --syst
--add_mc_conv --cfgBarrelTrackCuts --cfgMuonCuts --cfgWithQA --dcav0dau --isFilterPPTiny --muonSelection --tof-expreso
--add_track_prop --cfgDetailedQA --cfgMuonLowPt --customDeltaBC --debug --isProcessEvTime --onlySelect --v0cospa
--aod --cfgEventCuts --cfgMuonsCuts --cutLister --est --logFile --pid --v0Rmax
--autoDummy --cfgMaxTpcSignal --cfgMuonSels --d_bz --help --maxchi2tpc --process --v0Rmin
--cfgBarrelLowPt --cfgMCsignals --cfgNoQA --dcamax --isBarrelSelectionTiny --MCSignalsLister --run
After that you can similarly continue configuring your parameters with autocompletion.
VERY IMPORTANT P.S: Not every parameter in the interface has a value to configure. Some are configured as metavariable, meaning they are itself a value parameter. To explain this situation in detail, for example, --cfgWithQA parameter in tablemaker has to take one of two values as true or false, while --add_track_prop or -runMC is a parameter value directly and remains false when it is not added to the command line, they do not take a value. They are configured as true only when you type them on the command line.
Example:
python3 runTableMaker.py configs/configTableMakerMCRun3.json -runMC --add_track_prop
python3 runTableMaker.py configs/configTableMakerMCRun3.json --cfgBarrelTrackCuts jpsiPID1 --cfgWithQA true
list of metavar parameters:
--add_track_prop--add_fdd_conv--add_mc_conv-runMC (This parameter is only for tableMakerMC)-runData (This parameter is only for tableMaker)--logFile
← Go back to Prerequisites | ↑ Go to the Table of Content ↑ | Continue to Techincal Informations →
1.9.6